Water Pumps - Wind Pumps
FREE WATERPUMPING
The WINDSOL wind pump - with the distinguishing marks WP -
is produced in three basic types (as shows the table below), with
three, four or six blades. It employs a pump diaphragm type (membrane)
and is ideal for low depths (pumping up from 7 - 8 m.). For higher
depths, a piston pump is used, installed at the edge of the pipe that
gets into the well or the bore hole. For the corrosive protection
, all the steel parts are dip galvanized .
|
| Model |
WP100 |
WP200 |
WP300 |
| Rotor
diameter |
2.16 m |
3.20 m |
4.0 m |
| Height
of tower |
6
m |
9
m |
12
m |
| Valve
output |
1''
|
2''
|
3
'' |
| Capacity
m3 / h* |
2
|
4
|
6
|
| Total
elevation ** |
20
m |
20
m |
20
m |
| |
| * For wind
speed of about 8 m/s |
| ** If the
manometric head increases, then the capacity decreases accordingly |
| |
| ((A license
for local production can offered)) |
|
| |
|
| Wind Pumps (click the images to resize) |
|
25°C 
Water Pumps 
